Yes, the Fritzbox 7320 does have a WPS button. The WPS button is typically located on the front or side of the router and is used to easily connect devices to the Wi-Fi network without entering the password. Pressing the WPS button on the router and then on the device you want to connect will initiate a secure connection between the two. **

It is possible that the Fritzbox 7320 could be defective after a power outage, as power surges or outages can sometimes damage electronic devices. However, it is also possible that the device simply needs to be reset or have its settings reconfigured after the power outage. It is recommended to try resetting the Fritzbox and checking its settings before assuming it is defective. If the device still does not work properly after these steps, it may be necessary to seek technical support or consider replacing the device. **

For antique rustic oak furniture that you would like to lighten, a suitable wood type would be pine. Pine is a lighter wood with a natural grain that can complement the rustic style of the oak furniture. It is also easier to work with and can be stained or painted to achieve the desired lighter finish. Additionally, pine is a durable wood that can withstand the wear and tear of everyday use, making it a practical choice for furniture restoration. **

To block internet access for a specific PC on the Fritzbox 7320, you can use the parental control feature. First, log in to the Fritzbox user interface and navigate to the "Internet" tab. Then, select "Filter" and choose "Parental Controls." From there, you can add the MAC address of the PC you want to block and set the time restrictions for internet access. Once you save the settings, the PC will be blocked from accessing the internet according to the specified restrictions. **

To connect the Fritz Box 7320 from 1&1 with NetCologne, you will need to configure the settings on the Fritz Box to work with the NetCologne network. First, you will need to obtain the necessary connection information from NetCologne, such as the username, password, and any specific network settings. Then, you can log into the Fritz Box's web interface and input the NetCologne connection details in the internet settings section. Once the settings are saved, the Fritz Box should be able to connect to the NetCologne network and provide internet access to your devices. If you encounter any issues, you may need to contact NetCologne or 1&1 for further assistance. **

The Brother MFC 7320 making black stripes while printing could be due to a few different issues. One possible solution is to clean the corona wire inside the drum unit. This can be done by carefully following the instructions in the printer's manual. Another solution could be to replace the drum unit or the toner cartridge, as they may be causing the issue. If these solutions do not work, contacting Brother's customer support or a professional printer technician may be necessary to diagnose and fix the problem. **

The most common reason for a Brother 7320 scanner to continuously produce a black line on scans is likely due to a dirty or damaged scanning element, such as the scanner glass or the scanning bar. Dust, dirt, or smudges on the scanning element can obstruct the light path and result in a black line appearing on the scans. It is recommended to clean the scanning element thoroughly with a lint-free cloth and check for any physical damage that may be causing the issue. If cleaning does not resolve the problem, it may be necessary to contact Brother customer support for further assistance or to have the scanner serviced. **

The most common reason for a Brother 7320 scanner continuously producing a black line on scans is likely due to a dirty or scratched scanning glass. Dust, dirt, or debris on the scanning glass can obstruct the light path, resulting in a black line on the scanned images. It is recommended to clean the scanning glass thoroughly with a soft, lint-free cloth and check for any scratches that may be causing the issue. If cleaning the glass does not resolve the problem, there may be a hardware issue with the scanner that requires professional servicing. **